Serialio

SUPPORT

How to change the baud rate of the BlueSnap Smart dongle on Windows

The default baud rate for the BlueSnap Smart Dongle is 115200. Some applications may require a different baud rate. This article will walk you through the steps to change the baud rate (to 9600 in this example). You will need a terminal application like TeraTerm, PuTTy, or Serialio’s JavaTerm. We will use PuTTy in this example. You will also need a USB-RS232 cable to connect the BlueSnap Smart Dongle to the PC. Open PuTTy, select the Serial radio button and set your communication options to the correct COM port and

Read More »

BlueSnap Smart DEX “Send Fail” Error in Movilizer app

This article shows how to fix the “send fail” error in the Movilizer app when using the BlueSnap Smart BLE DEX dongle.   Connect your BlueSnap Smart with yACK BLE on iOS or Android Download the yACK BLE app from the iOS App Store or Googl Play Store Launch the app and connect to the BlueSnap  Tap “Command” on iOS or “STRM” on Android to switch from ‘Stream’ mode to ‘Command’ Mode Change the Baud Rate of the device to ‘9600’ In command mode, send the following commands (note: commands

Read More »

How to use yACK BLE to setup the BlueSnap Smart to pair with Windows 10 via BLE

This article demonstrates how to use the yACK BLE app for Android to set up the BlueSnap Smart BLE dongle to connect to Windows 10. Due to how Windows 10 Bluetooth pairing works, you cannot pair with the BlueSnap Smart without changing the “bl e e” setting from 0 to 1. Please note, that this process doesn’t work for Windows 7 (nor earlier versions of Windows). To follow through with this tutorial, you will need: The yACK BLE app (available on iOS and Android) A BlueSnap Smart dongle A Windows 10 computer

Read More »

How to pair the BlueSnap Smart with Windows 10 via BLE

This article demonstrates how to pair the BlueSnap Smart BLE dongle to connect to Windows 10. If you haven’t already set up your BlueSnap Smart dongle to be able to pair with Windows 10 (by default it will only pair with Android/iOS), please do so now by following our guide on configuring the BlueSnap Smart to pair with Windows 10.  Pair your BlueSnap Smart with Windows 10 Bluetooth settings 1. Make sure that your Window 10 PC or tablet supports Bluetooth Low Energy (Bluetooth 4.0 or later) and that Bluetooth

Read More »

Set Baudrate BlueSnap M6A Wireless RS232 (DB9) Adapter

This page shows how to set baudrate (aka bitrate) on BlueSnap M6A wireless RS232 Adapter. Load yACK BLE app on Android or iOS Connect to M6A with yACK BLE app. Android: tap STRM so it shows RCMD. iOS: Tap COMMAND. yACK BLE is now in COMMAND mode. Check the baudrate using command ‘get ua b’ (type “get ua b” on command line) then tap SEND (iOS / Android) Set the baudrate using command ‘set ua b baudrate’ then tap SEND, then use command ‘save’, now power off/on the BlueSnap M6A and the baudrate

Read More »

Unix Error Numbers

#define EPERM 1 /* Not super-user */ #define ENOENT 2 /* No such file or directory */ #define ESRCH 3 /* No such process */ #define EINTR 4 /* Interrupted system call */ #define EIO 5 /* I/O error */ #define ENXIO 6 /* No such device or address */ #define E2BIG 7 /* Arg list too long */ #define ENOEXEC 8 /* Exec format error */ #define EBADF 9 /* Bad file number */ #define ECHILD 10 /* No children */ #define EAGAIN 11 /* No more processes */

Read More »

SerialPort Install Notes

The Java Tool For Serial PortsVersion 6.1WinXP/2K/NTx86/98/95, OS/2, Mac PPC OS9/OSX,Solaris Sparc/x86, Linux x86/ARM, FreeBSD x86, HP/UX PA-RISC, SGI IRIX MIPS, IBM AIX PPC, SCO UnixWare IA32, Compaq Tru64 Alpha, Novell Netware, WinCE MIPS/SH3/SH4/ARM, EPOC32 ARM, PocketPC 2002 MIPS/SH3/SH4/ARM Java compatability Note This version was compiled with JDK 1.4.0. Due to enhancements in JDK 1.4.0, certain older code may not run as expected when run on older versions of the Java VM (1.1.8 in particular). If you plan to run on JDK 1.1.8 use the Serialio.jar in the ../Core/Jars/JDK118 folder.

Read More »

SerialPort Power Management Examples

SerialPort provides power management for PCMCIA and CF cards.* This allows you to maximize battery life by minimizing the power consumption of your application. Using the power management features is very simple. Below, you’ll find a couple of example snippets that demonstrate SerialPort’s power management capabilities. Example 1 — Querying the state of a particular card slot: int slot = choiceSlot.getSelectedIndex();int pMode = SerialPortLocal.getPowerMode(slot); Example 2 — Setting the card state to standby or active: int pMode = 1;if (cbStandby.getState()) pMode = 0;int slot = choiceSlot.getSelectedIndex();SerialPortLocal.setPowerMode(slot, pMode); *Not supported on all platforms

Read More »

About Java SerialPort

SerialPort is the world’s first (since 1996), and still foremost Java product for serial ports. SerialPort provides highly flexible control of serial ports from your Java application.SerialPort is a high-performance class that also provides low-level serial port control. If your device plugs into a serial port—on or off the Internet—it is almost certain that you can use SerialPort to communicate with it. Applets To implement applet support, you must create a ‘trusted’ applet. If you’re interested in creating trusted applets, ask about our Termlet Package which has the source code

Read More »

SerialPort Version Changelog

Changes for version 9.2-9.3 Support Windows Server 2019 Changes for version 9.1-9.2 Linux x86 serGetPortList support, aarch64 architecture, ttyUSB  Changes for version 9.0-9.1 Support Windows Server 2016 Changes for version 8.9-9.0 Support Raspberry Pi-3 (LuxArm 32-bit)Support ODROID (in RPi-3 package – LuxArm 64-bit) Changes for version 8.8-8.9 Support Windows 10 Changes for version 8.7-8.8 Windows Server 2012 R2 Changes for version 8.6-8.7 Support Windows 8.1 Changes for version 8.5-8.6 Support device type: Manufacturer: Ingenico – Description: Ingenico iSC350 Comm Port Support device type: Manufacture: Conexant – Description: Conexant HDA D330 MDC

Read More »

Our Testimonial