Serialio

SUPPORT

Faster NF4x On iOS

Get faster badge reads on your idChamp® brand NF4x RFID-NFC reader on iOS. You speed up NF4x reads to check-in people faster for class attendance, mustering, or other event needing attendance. This example shows iOS SDM option. NF4x Badge Reader Modes: Smart & Direct Your idChamp® brand NF4x Badge Reader has two basic modes, Smart, and Direct. In Smart Mode the application easily controls what badge types are recognized and decodes the credential information as needed in the app. In Direct Mode the NF4x is loaded with specific firmware that does all badge processing

Read More »

Faster NF4x Reads iOS

Your idChamp® brand NF4x RFID-NFC reader works great on iOS. Now get faster NF4x reads on iOS to check-in people faster for class attendance, mustering, or other event needing attendance.   NF4x Badge Reader Modes: Smart & Direct Your idChamp® brand NF4x Badge Reader has two basic modes when connected to iOS, Smart, and Direct. In Smart Mode the application easily controls what badge types are recognized and decodes the credential information as needed in the app. In Direct Mode the NF4x is loaded with specific firmware that does all

Read More »

How To Speed Up NF4x Reads

Your idChamp® brand NF4x RFID-NFC reader works great. Now you want to speed up NF4x reads to check-in people faster for class attendance, mustering, or other event needing attendance. This example shows Android SDM option. NF4x Badge Reader Modes: Smart & Direct Your idChamp® brand NF4x Badge Reader has two basic modes, Smart, and Direct. In Smart Mode the application easily controls what badge types are recognized and decodes the credential information as needed in the app. In Direct Mode the NF4x is loaded with specific firmware that does all badge processing in the

Read More »

idChamp RFID Readers Facilitate Mining Site Compliance

How does the 2nd largest major mining company in North America manage their on-site personnel?idhamp RFID readers facilitate mining site compliance at this major mining company. Why Tracking On-Site Personnel Is Important Knowing your employees locations is important for their safety. Additionally your contractors, visitors and guests also appreciate your concern for their safety. Finally your government likely requires compliance of your personnel management system. Multi-Site Personnel Management Problem How do you rate your company’s mining site personnel management?Your site compliance system must be able to report who is currently

Read More »

RFID Badge & Smartphone Credential Attendance Management Kiosk

stratus-io Time and Attendance by Cloud-In-Hand Solutions Framework with the idChamp® NF4 RFID-NFC reader provides unmatched flexibility and convenience to read every type of RFID employee ID badge credential in common use (and many not so common) for attendance, training, meetings, and emergency evacuations. The Lillitab desktop kiosk shown in this video provides a convenient secure kiosk form factor (locked with a physical key) for unattended operations. Floor stand and wall-mount options are also available. Kiosks can support many Android and iOS devices. Cloud-In-Hand Solutions Framework can also provide soft

Read More »

Forklift Driving Enabled with Employee Badge – Track Vehicle Usage – Confirm Safety

A manufacturing company was having trouble accurately understanding who was operating forklifts on-site. Forklift operators had Bluetooth Beacons that were detected and authenticated by their on-board Android application to register usage and task completion.  Operators would leave the beacon on the forklift and enable anyone to drive without proper approval and management. For example they had one report indicating an operator drove for 56 hours straight. This made it impossible for the company to understand which employee was responsible for the forklift and how effective they were at completing tasks.

Read More »

idChamp® NF4x LED & Button Descriptions

NF4x has one physical button for power on/off and functionality, and one micro-USB connector for power/charging. Battery model: Press the button briefly to power on the unit. Press and hold the button and Connection LED will blink briefly, then stop blinking, when blinking stops, release the button and NF4x will power off. Kiosk model: Plug micro-USB cable (regulated 5V) and the unit will power on.    When power is applied the power/charge LED will illuminate. For battery model this LED will change to green when the unit is fully charged.  

Read More »

idChamp NF4 Post Correct RFID Badge Value

Why does my RFID badge read post the incorrect value?   You use the NF4x SDM PAC Wizard to post the correct RFID badge value. You scan a badge, but the RFID-NFC value posted is not the value printed on the card. This post shows you how to get the correct value using the idChamp NF4x wireless mobile badge reader.   You use the SDM (Serial Device Manager) PAC wizard to setup idChamp NF4x (Smart Mode only) to setup the idCamp brand NF4x post the correct RFID badge value. Use

Read More »

How to pair your scanner in BLE mode on iOS

This document provides instructions on how to pair your scanner with Serialio’s applications for iOS in BLE mode. Please note that not all scanners sold by Serialio support BLE mode. To see which Bluetooth mode your scanner supports, click here. Make sure your scanner is in BLE mode. Make sure Bluetooth is enabled on your iOS device. Make your scanner discoverable and connectable. Launch SerialMagic Keys, iScanBrowser, or Cloud-In-Hand Mobile Grid. Navigate to the SDM. Tap on your scanner’s name when you see it listed as a discovered device beneath Bluetooth LE

Read More »