1. Navigate to iScanBrowser’s settings page by tapping on the gear icon located on the floating taskbar. 2. Scroll down to the bottom of the settings page until you see a button labeled “Upload log to cloud.” 3. Tap on “Upload log to cloud.” 4. Enter your name (so we know who to associate the log or bug report with) and the password for log uploading. You can get the log password from the Serialio representative you’re working with. If you aren’t currently working with a Serialio representative, contact us

iScanBrowser is compatible with genuine Scanfob Brand Scanners in Bluetooth HID mode. However, you will need to enable the option in Settings. 1. Tap on the Settings icon. 2. Enable the option to Detect Scanfob® 2006, 2005.

This document provides information regarding the appearance settings for iScanBrowser (iOS). To access iScanBrowser’s appearance settings, navigate to iScanBrowser’s settings page by tapping on the gear icon located on the floating taskbar. Then locate the section labeled “Appearance Settings.” Enable Fullscreen Mode To enable fullscreen mode, toggle the slider to the far right of “Fullscreen.” Enable Orientation Lock To enable orientation lock, tap on the option labeled “Orientation lock.” Then select the mode in which you want to lock the orientation: System orientation (default) Portrait Portrait Upside Down Landscape left

iScanBrowser triggers allow you to map a specific button (either in the floating taskbar or floating) to trigger a read action to the associated barcode scanner, RFID scanner, or UniMag reader. The floating trigger can also be assigned to trigger a read from the iOS CoreNFC reader. To access iScanBrowser’s trigger settings, navigate to iScanBrowser’s settings page by tapping on the gear icon located on the floating taskbar. Then locate the subsection labeled “Triggers Scanner Setup.” About the Triggers Trigger #1 — RFID Trigger #1 can be assigned to any

This document provides information and instruction related to using the Serial Device Manager (SDM) for iOS, which is built into iScanBrowser. You can access the SDM by tapping on the SDM icon from the floating taskbar. Pair with a Bluetooth Device The main page of the Serial Device Manager is where you’ll be able to pair with, manage, and disconnect from your Bluetooth devices. Scanners in HID mode (already paired within iOS Bluetooth Settings) will appear beneath “CONNECTED DEVICES,” scanners in MFi mode, will appear in the section labeled “MFi