Serialio

SUPPORT

Common types of NFC tags

Although NFC is a subgroup of RFID technology, there are many varieties of NFC tags/inlays to choose from for different solution needs. This page is a summary guide showing common NFC inlay and tag type options available for many common RFID solutions and application needs. This article is a part of the series of articles intended as a practical guide to NFC serving to address many common considerations when selecting an NFC tag type for your unique application or solution.  Clarification — “NFC tag,” as used in this series of articles,

Read More »

Applications of NFC

There are many, many applications for NFC technology — from the chip embedded in your credit card to streamlining other technologies, such as Bluetooth pairing. The combination of close-range data transfer, ease of use, and versatility make NFC perfect for environments where data transactions have a requirement for location-specific access (for example, you don’t want your credit card chip to be accessible from more than a few centimeters away). Below are some of the most common uses for NFC (note that this is far from an all-inclusive list). Common Use

Read More »

Factors That Affect RFID/NFC/UHF Read Range

There are a handful of factors that can affect RFID, NFC, or UHF tag read ranges. If you’re interested in understanding the various aspects that affect RFID read range to improve your RFID application or use case, continue reading! Tag Characteristics (SOAP) SOAP is an acronym for the various factors that affect an RFID tag’s performance; size, orientation, angle, and placement. Not to be confused with Simple Object Access Protocol (SOAP). S Size O Orientation A Angle P Placement Inlay Size — As a rule of thumb, the bigger the tag inlay,

Read More »

Components of an RFID Tag

Inlay The tag inlay consists of the integrated circuit (IC), an antenna, and a substrate to hold it all together. The inlay, on its own, is a fully functional tag; ready to be packaged into either a smart label or another casing. Integrated Chip (IC) The IC is an electronic circuit or microchip that is manufactured at a semiconductor plant. This microchip contains a memory store and a microprocessor or decision making (logic) unit. The IC is configured either as a passively powered device (powered by inductive coupling generated from

Read More »

An Introduction to UHF RFID

The latest standardization of the Ultra-High Frequency RFID spectrum is the GS1 UHF Gen2 protocol (ISO/IEC 18000-63), which defines the technical specifications (e.g., physical/logical interactions between devices, anti-collision algorithms, security commands, etc.) for RFID devices operating in the frequency of 860–860 MHz. The ITU designated UHF (Ultra-High Frequency) as the radio frequency range of 300 MHz to 3 GHz, while the IEEE defines UHF as only frequencies between 300 MHz and 1 GHz (the rest of the ITU–defined UHF frequency range overlaps with the IEEE’s frequency allocations for the L band and

Read More »

RFID Terminology

Active Tag: A battery-powered RFID tag that powers the circuitry that transmits the signal to a reader. Active tags differ from passive tags in that they have longer read ranges, a higher price tag, and a larger size (due to the battery). Antenna: The element built into both RFID readers and tags that radiates and receives radio energy. Automatic Identification (also called automatic data capture): The ability to collect and enter data directly into computer systems without human involvement through technologies such as barcodes, biometrics, RFID, and voice recognition. Backscatter:

Read More »

The Difference Between the RFID Frequency Ranges (LF/HF/UHF)

The frequency range of an RFID system has a significant impact on multiple performance metrics like the read range and interference susceptibility, so it’s important to make sure you select the right frequency for your business application or use case.    LF/NFC HF UHF Frequency range 125 – 134.2 KHz 13.56 MHz (global) 433, 865 – 828 MHz (varies regionally) Read range < 10 cm < 1 m 1 – 100 m Tag cost Relatively expensive Varies Inexpensive (in high volumes) Reader cost Relatively inexpensive (established technology) Relatively inexpensive (established technology) More expensive

Read More »

The Difference Between Active and Passive RFID Tags

The primary difference between active and passive tags is that active tags have their own power source (typically an embedded battery) and passive tags rely on the RFID reader’s propagation signal to power the tag. From this primary distinction stems a variety of considerations to make when deciding between the two types of tags. This article aims to help aid you in deciding which type of tag — active or passive — is best for your business application by laying out some of the most pivotal factors you should consider.   Active

Read More »

How Does An RFID System Work?

In its most rudimentary form, an RFID system is made up of two parts; a transponder (a tag) and an interrogator (a reader). The transponder, which consists of an inlay which has a microchip, an antenna, and usually a substrate (the stuff that holds the tag’s components together) and optionally an encasing to protect the inlay from various environmental factors, is encoded with information specific to the object it is attached to or associated with, such as a serial number. The interrogator reads the transponder’s information by emitting a signal to the transponder

Read More »

WiSnap WiFi connection to PC using COM-TCP Redirector

This page demonstrates how a COM-to-TCP connection can be made from a PC to the WiSnap RS232 adapter. The first step is to install the Null-modem emulator (com0com) application, which installs and works as a driver for a pair (or many pairs) of virtual COM ports. You can download the com0com installer HERE. You can create as many pairs of virtual COM port as you like, and use any pair to connect one application to another. The COM port pairs will be given names starting at CNCA0 and CNCB0. These

Read More »

Our Testimonial