Serialio

SUPPORT

NF4x DIP Switches | Always-On Option For Battery Unit

DIP Switches For FAST Battery & Kiosk Modes | NF4x, RS4x, RS3x, DX1 You set the idChamp® NF4x DIP switches for some options. First remove cover on the idChamp® reader models NF4x, RS4x, RS3x, DX1. Second see idChamp® NF4x Wireless RFID-NFC Smart Card Reader/Writer Switches for ‘button power on’ (Battery) mode. Switches are also the same for RS4x, RS3x, DX1. Next to put idChamp® NF4x Wireless RFID-NFC Smart Card Reader/Writer in ‘kiosk’ (cabled power) mode, set switch S3-3 in ON position. Finally Note: You can set switch S3-3 on for the

Read More »

idChamp® NF4x RS4x Wireless Modes

Set Wireless Mode FAST or HID You set idChamp® NF4x, RS4x, RS3x, DX1x RFID-NFC reader/writer wireless modes are set using the yACK FAST app.   IMPORTANT – Only set NF4x Direct Mode model reader in HID Keyboard (KB) Mode. When you set the NF4x Smart Mode model to KB mode, it will not work. NF4x Smart Mode reader only works in FAST mode.   Connect via BLE by default, this is the highest performance mode for the readers. Using an app like SerialMagic Keys, iScanBrowser, Cloud-In-Hand Mobile Grid, stratus-io Time

Read More »

idChamp NF4x Post Correct RFID Badge Value

Setup the idChamp® NF4x to post correct RFID badge value You use the NF4x SDM PAC Wizard to get the correct RFID badge value to post to your iOS application. You scan a badge, but the RFID-NFC value posted is not the value printed on the card. This post shows you how to get the correct value using the idChamp NF4x wireless mobile badge reader. You use the SDM (Serial Device Manager) PAC wizard to setup idChamp NF4x (This works for NF4x Smart Mode models only) to setup the idChamp® brand

Read More »

Android NFC Connect Bluetooth Scanner

Use Android NFC to Connect Bluetooth Scanner. How to use Android‘s built-in NFC sensor to pair with a Bluetooth scanner that has an embedded NFC chip with it’s MAC address stored in the NDEF data (such as the Scanfob 2006). Tip —  You can enable this feature with any BLE scanner by writing the scanner’s MAC address to the NDEF data of an NFC chip. 1. Navigate to the Serial Device Manager (SDM). or 2. Tap on the options menu button (the three vertical dots button at the top right-hand

Read More »

Pair Scanfob® Brand Barcode Scanner with iOS in Keyboard Mode

This support article will walk you through the steps to pair your Serialio Scanfob with iOS (iPhone, iPod, iPad) in HID-Keyboard mode. As a general best-practice, make sure your Scanfob is fully charged (indicated by a green LED when plugged in). 1. Put your Scanfob in Bluetooth HID (keyboard) mode by scanning the control code labeled “Bluetooth-HID” on your Quick Start Guide (included in Scanfob package). If you don’t have your Quick Start Guide, you can download a new copy from our Quick Start Guide page. 2. Make your Scanfob

Read More »

Soft Reset Scanfob® Brand Scanner

f your barcode or RFID scanner is having problems sending data, connecting or is behaving in an unexpected manner, try resetting it. You will find instructions for performing a “reset” on various scanners sold by Serialio in the table below. If you continue to have issues after resetting your scanner (or if you don’t see your model and you’d like us to add it), contact Serialio’s support team. Scanner Model Reset Method Scanfob 3002i Method A Scanfob 4000i & 4000n Method A Scanfob 2006 Method A KeyBatch BR2 Method A

Read More »

Connect SPP vs FAST

How to pair in wireless SPP vs FAST the differences and similarities between the pairing process for SPP (Serial Port Profile) and FAST. Although these two profiles are commonly used for a variety of applications, the focus of this guide is on the implications related to using Serialio’s scanners in either SPP and FAST modes.  The most important difference when switching between FAST and SPP is that you CANNOT pair through your device’s wireless settings app while using FAST mode. Below are basic instructions on how to pair your wireless scanner

Read More »

How to factory reset the KDC200

This article provides instructions on how to perform a factory reset on a KDC200 barcode scanner. 1. Hold down both the up and down arrows, located on the left side of the device. 2. Once the menu appears, use the same arrow buttons to scroll through the options until you see “System Config” highlighted. 3. Press the scan button, located on the front of the device. 4. Use the arrow buttons to scroll through the options until you see “Fac. Default” highlighted. 5. Use the scan button to select it.

Read More »

How to use the KeyBatch BR2 as a flash drive

The KeyBatch BR2 can be used as a flash drive, allowing you to access your scans by plugging in the scanner to your computer and opening the drive that appears. You can configure the formatting of the scans using the configuration guide (in links below). This includes how time and date formats display, what fields are included in the output file, and what separator to use (comma, pipe, etc.).

Read More »

Our Testimonial