stratus-io Time and Attendance by Cloud-In-Hand Solutions Framework with the idChamp® NF4 RFID-NFC reader provides unmatched flexibility and convenience to read every type of RFID employee ID badge credential in common use (and many not so common) for attendance, training, meetings, and emergency evacuations. The Lillitab desktop kiosk shown in this video provides a convenient secure kiosk form factor (locked with a physical key) for unattended operations. Floor stand and wall-mount options are also available. Kiosks can support many Android and iOS devices. Cloud-In-Hand Solutions Framework can also provide soft
A manufacturing company was having trouble accurately understanding who was operating forklifts on-site. Forklift operators had Bluetooth Beacons that were detected and authenticated by their on-board Android application to register usage and task completion. Operators would leave the beacon on the forklift and enable anyone to drive without proper approval and management. For example they had one report indicating an operator drove for 56 hours straight. This made it impossible for the company to understand which employee was responsible for the forklift and how effective they were at completing tasks.
NF4x has one physical button for power on/off and functionality, and one micro-USB connector for power/charging. Battery model: Press the button briefly to power on the unit. Press and hold the button and Connection LED will blink briefly, then stop blinking, when blinking stops, release the button and NF4x will power off. Kiosk model: Plug micro-USB cable (regulated 5V) and the unit will power on. When power is applied the power/charge LED will illuminate. For battery model this LED will change to green when the unit is fully charged.
This support article demonstrates how to install or update SerialMagic Professional for Windows. 1. Download the SerialMagic Professional installer for Windows from Serialio.com/downloads. 2. Double-click the installer to launch it (this initiates the installation). You may be prompted by Windows’ UAC to authenticate the installation. 3. Agree to the terms and conditions to begin the installation. 4. The following screen allows you to change the installation location if necessary. Most users need only click “Install.” 5. Device Drivers — SerialMagic Professional will now ask which device drivers (if any) you want
This article demonstrates how to connect the BlueSnap modle M6A smart Bluetooth Low Energy (5.0) to an RS-232 adapter to Windows using SerialMagic Professional. We have broken down this process into three steps: (1) Pair through Windows Bluetooth, (2) Pair through SerialMagic Professional, and (3) Start the connection. This tutorial will only work after yACK BLE has been used to set up the BlueSnap Smart to be able to pair with Windows 10. If you haven’t already done so. Pair via Windows 10 Bluetooth Settings 1. Power on your BlueSnap Smart
This article demonstrates how to set up the Ultra-PD1 with SerialMagic Professional on Windows via a cabled connection. 1. Connect the Ultra-PD1 to your Windows PC via the USB A to USB A cable. 2. Launch SerialMagic Professional And click “Add” to create a new connection. 3. Select “Cabled Connection” and the image of the Ultra-PD1 (labeled “IceKey UHF“), then click “Next.” 4. Select the COM port assigned to the Ultra-PD1, then click “Next.” 5. Select how the reader will be used. For this tutorial, we are using the Ultra-PD1 “like
This article provides instructions on how to find your unique device ID (DID) and activate your installation of SerialMagic Professional for Windows for use with non-genuine scanners (scanners that were not purchased from Serialio). You will need to contact a Serialio representative to complete this process (you cannot activate your software alone). If you haven’t already, download the SerialMagic Professional for Windows from https://serialio.com/downloads and install it. You can find your unique hardware ID by navigating to Help → Register SerialMagic. Here the hardware ID is referred to as “Computer ID.” Copy
This support article will walk you through unpairing your device from a Windows computer. The first section (Part A) provides instruction for unpairing with SerialMagic Professional on Windows (applies to all types of connections). The second section (Part B) provides instruction for unpairing from Windows Bluetooth Settings (applies to devices in paired with Bluetooth-HID (keyboard mode) and Bluetooth-SPP (SerialMagic). Part A. UnPair from SerialMagic Professional 1. From SerialMagic Professional, click “Stop” to terminate your current connection. 2. Under “Connection Primary/Secondary,” select the connection associated with your Scanfob from the drop-down
This support article will walk you through how to pair your Scanfob with SerialMagic Professional on Windows 10. For the purposes of this tutorial, we used a Scanfob 2006 Bluetooth Barcode Scanner in SPP mode. The process for pairing any barcode/RFID scanner with SerialMagic Professional for Windows in SPP mode is nearly identical. Pair with Windows Bluetooth Settings 1. Click on the Windows Start Menu 2. In the search bar, type “Bluetooth.” 3. Click on “Bluetooth Settings.” 4. Make sure that Bluetooth is enabled and turned on. 5. With your
This support article will walk you through how to submit a log from SerialMagic Professional for Windows. For the purposes of this tutorial, we used SerialMagic Professional version 126.96.36.199 on a Windows 10 computer. If you are having problems with SerialMagic Professional for Windows, please contact the Serialio support team. Include the following information: SerialMagic Professional version number (e.g. “188.8.131.52”) Windows version (e.g. “Windows 7”) Order number Device/scanner model (e.g. “Scanfob 2006”) Your use case-scenario (e.g. “data is sent into a spreadsheet”) Clear the Log 1. Launch SerialMagic Professional. 2.