Scanfob® NFC-BB2e Wireless Windows Connection
Scanfob® NFC-BB2e wireless Windows connection requires reader to be set in BB3 pairing mode using yACK FAST app on iOS or Android.
First charge the NFC-BB2e reader for at least 30 min, full charge should take less than 2hrs.
iOS - Setup For Windows Connection - yACK FAST
First install yACK FAST iOS app from Appstore. Second launch yACK FAST app then power on the NFC-BB2e reader and see it under NEARBY. Third tap on the name under NEARBY and the scanner will connect. If iOS prompts to Pair, the NFC-BB2e may already be in BB3 pairing mode.
Forth tap on the tool icon in upper-right of yACK FAST app main view, then tap Set BB3 pairing mode.
Fifth tap Enable Pairing Mode, then the scanner will power off and NFC-BB2e Windows Connection is ready. Finally power on NFC-BB2e, then connect to SerialMagic Keys Pro Windows.
Note when using NFC-BB2e on the same iOS device that was used to set BB3 pairing mode. First open iOS wireless settings app and unpair the NFC-BB2e.
Android - Setup For Windows Connection - yACK FAST
First install yACK FAST iOS app from Play. Second launch yACK FAST app then power on the NFC-BB2e reader. Third tap SELECT DEVICE then find the scanner name (SNF-…) and tap on the name to connect. If Android prompts to Pair, the NFC-BB2e may already be in BB3 pairing mode.
Second tap on the 3-dot menu in upper-right, then tap Set Pairing Mode.
Third tap Enable BB3 pairing, then tap SET MODE.
Finally power on NFC-BB2e, then connect to SerialMagic Keys Pro Windows.
Note when using NFC-BB2e on the same Android device that was used to set BB3 pairing mode. First open Android wireless settings app and unpair the NFC-BB2e.
Keyfob Size NFC-BB2e Scanner Works Everywhere
Use your Keyfob Size NFC-BB2e Scanner everywhere with SerialMagic on Windows, macOS, iOS, Android.