Serialio

NEWS AND ANNOUNCEMENTS

SERIALIO NEWS

RS3x DIP Switch Settings for Cabled Mode

You set idChamp® RS3x RFID-NFC reader DIP switch settings for different operating modes. Firstly, option 1 is to setup RS3x RFID engine using the RS3 NFC Setup iOS app. Secondly, you can setup RS3x RFID engine using the RS3 NFC Setup Android app. Finally you use cabled mode to setup the RFID-NFC engine with a Windows PC. For example, cabled mode you will use to setup the RS3x with the pcProxConfig app on Windows. When you use cabled mode, a USB RS-232 adapter is needed, along with an idChamp bridge

Meeting Check-in Using Apple Watch

How do you check in to a meeting when your iPhone is in your pocket or purse?Who said attendance arrival using Apple Watch could not be fun? Empower Your Wrist stratus-io Remote Check-in empowers you to check-in to your meeting using your Apple Watch. You can check-in & out of your meeting, event, or class while your iPhone is in your pocket or purse. When you simply load the Cloud-In-Hand® stratus-io Remote Check-in app on your iPhone & Apple Watch, you then have check-in, check-out options using your Apple Watch.

Mining Site Safety Compliance

How does the 2nd largest major mining company in North America manage their on-site personnel?Using idhamp® RFID readers to facilitate mining site safety compliance at the 2nd largest mining company in North America. Why Tracking On-Site Personnel Is Important Knowing your employees locations is important for their safety. Additionally your contractors, visitors and guests also appreciate your concern for their safety. Finally your government likely requires mining site safety compliance of your personnel management system. Multi-Site Mining Personnel Management Problem How do you rate your company’s mining site personnel management?Your

How To Setup idChamp® NF2 Switches

The idChamp® NF2 RFID-NFC Reader/Writer can connect to the host via USB, or via Wireless (BLE). This page shows the DIP switch setting options. NF2 Wireless (BLE) Mode DIP Switch Settings

Geolocation Attendance Automatic Checkin/Checkout

You use Geolocation attendance for automatic check-in and checkout personnel at any location using stratus-io: Remote Check-In. First you create geofences (geolocations) in any number of places. Then personnel automatically check-in and out as they enter/leave the defined geographic location. Finally you have accurate incident reporting with automatic check-in. See your group on-site check-in, check-out, and resource auditing.  First, see your custom geofences in the stratus-io app on an Android or iOS devices. Third, users get push notifications immediately as they enter the geofence alerting them of check-in. Thirdly, once

RFID Badge & Smartphone Credential Attendance Management Kiosk

stratus-io Time and Attendance by Cloud-In-Hand Solutions Framework with the idChamp® NF4 RFID-NFC reader provides unmatched flexibility and convenience to read every type of RFID employee ID badge credential in common use (and many not so common) for attendance, training, meetings, and emergency evacuations. The Lillitab desktop kiosk shown in this video provides a convenient secure kiosk form factor (locked with a physical key) for unattended operations. Floor stand and wall-mount options are also available. Kiosks can support many Android and iOS devices. Cloud-In-Hand Solutions Framework can also provide soft

Forklift Enabled by Employee Badge

Ensure safety and compliance for your company forklift operations so only properly trained and authorized forklift drivers can use equipment. Driving the forklift is enabled by an employee badge scan. One manufacturing company forklift report showed an operator drove the forklift for 56 hours straight. You can see obviously that’s not what was happening. First, this company’s prior solution was forklift operator use was enabled Bluetooth Beacons. Secondly, the beacon was detected and authenticated by their on-board Android application to register usage and task completion. Thirdly, the company failed to

No Tap Check-in Portal Onsite Construction

Why No Tap Check-in? You need No Tap Check-in(TM) because your users are not using your current tap-to-checkin NFC-RFID readers with their badges. Firstly, your organizations RFID badges readers are great, and employees use them to tap-in and tap-out, this is a major improvement. However, now you need users to be checked-in and checked-out simply by walking to and from the job site. Automatic Onsite and Offsite Tracking Portal for Employees, Contractors, & Visitors Your attendance events instantly upload and provide you real-time reporting of resource use. Additionally, you have records

Sending Wireless Bluetooth Data Using 3rd Party Keyboard SerialMagic Keys

How can iOS keyboard be used to send user specified data to a wirelessly connected device?  SerialMagic Keys iOS provides a ‘Command Key’ option to send user defined data to trigger some event on the device connected to BlueSnap M6A DB9 connector serial port e.g. to trigger scale to send weight, RFID reader to read tag, sensor to take measurement, barcode scanner to read barcode, etc.   Open SerialMagic Keys app on iPhone, iPad, iPod Touch, then tap on “Command Key” Choose the wireless device that SerialMagic Keys will send

Smartphone Wallet Attendance Check-in

Why Smartphone Wallet Attendance Check-in You do smartphone wallet attendance check-in with secure credential stored in smartphone’s wallet. Your credential is stored in your Apple Wallet when you have an iPhone. You check-in to your meeting or event using your iPhone or Apple Watch. Your unique credential is securely stored in the smartphone wallet then you don’t carry your physical employee badge to check-in. Check-in for your meeting, class, and membership, use for tool and equipment check-out, everything your badge can do, your phone can do with soft credential stored

Our Testimonial