This tutorial will demonstrate how to use SerialMagic Professional’s Action Profiles feature to automatically clip data. For this demonstration, we are using SerialMagic Professional for Windows 10. 1. Click on “Action Profiles Manager.” 2. Right-click within the SerialMagic Action Profile Manager window and select “Add Profile.” 3. Name the new profile something that makes sense. Then add a short description before clicking “OK” to save. 4. You can save the Action Profile is one of two ways. Select “Save” if you will only be using this workflow on the current

This support article will show you how to configure SerialMagic Professional for Windows for use with the idChamp UHF 1126/1128. This tutorial is applicable to both the idChamp UHF 1126 desktop scanner and the idChamp UHF 1128 scanner. 1. Plug your idChamp 1126/1128 into your Windows PC via the micro USB cable that came with it in the box. 2. Download and install SerialMagic Professional for Windows if you have not already done so. 3. Launch SerialMagic Professional and click on “Add” to add a new connection. 4. Select “Cabled

To configure the Scanfob® Ultra-BB2 you will need the following items: Add the Scanfob® Ultra-BB2 Once you have all the necessary components, plug the Scanfob® Ultra-BB2 into your Windows PC using the USB cable then open SerialMagic Professional. If you have never used SerialMagic Professional before, you will be prompted with the device wizard. If you do not see this screen, but rather the main SerialMagic Professional window, click the Add button to access the wizard. Once inside the wizard, choose Cabled connection as the connection type and choose the Scanfob® Ultra-BB2

This support article demonstrates how to connect the Ultra-PD1 cabled UHF scanner with SerialMagic Professional for Mac OS X. 1. Install the latest version of SerialMagic Professional for Mac (click here to download). 2. Plug the Ultra-PD1 into your Mac via the USB cable it came with. 3. Launch SerialMagic Professional. 4. Navigate to “Preferences” then click on the “Scanner” tab. 5. Select the scanner device. In this case, it should be something along the lines of “usbserial– …” 6. Set the scanner type to Ultra-PD1 (aka ICEKEY UHF). 7.

This page outlines the SerialMagic engine API interface on Windows. On Windows, the SerialMagic API is provided via an event-based interface. The example project builds the “DirectDataTest” application which is designed to work with SerialMagic Professional 4.3.2.0 and later. To test the API first run SerialMagic Professional 4.3.2.0 or later, then in the Application Settings dialog enable the “Post Direct Data” option. When DirectDataTest is running ensure that SerialMagic Professional is running, then tap the DirectDataTest “Register” button and it should register to receive scan events (or data packets) from SerialMagic