iScanBrowser is a powerful tool for iOS and Android that allows you to scan data into a web browser. You can set up Web Form Rules (WFRs) to automatically send scans into a specific form field, use the scan as the URL address, run JavaScript, and more based on the conditions you configured in the WFR. This is useful when you need to scan data quickly without using the iOS/Android device’s interface (eliminates the need to avoid the need to tap the field as the focal point for the cursor). You can

The IP30 is a handheld UHF (ultra-high frequency) RFID reader manufactured by Honeywell. To learn more, visit Honeywell’s product page for the IP30.

The Intermec SG20 is a 1D/2D handheld barcode scanner manufactured by Honeywell. For more information, see Honeywell’s product page for the Intermec SG20.

The idChamp® RS4 NFC reader-writer supports the HID Global Mobile Access app allowing Android and iOS phones to be used as credentials. RS4 also supports reading and writing of NFC tags like NTAG and MiFARE. RS4 reads and writes NDEF data, and RAW data, as well as all common access control badges for both 125 kHz and 13.56 Mhz including HID iCLASS SEOS tags. To learn more, visit the idChamp® RS4 reader product page or download the spec sheet.

The idChamp® NF2-5011 is a cross-platform wireless mobile NFC-RFID reader/writer with support for iOS, Android, and Windows. It can read NDEF data and CSN from most major NFC cards, making it perfect for nearly any mobile RFID application. To learn more, visit the idChamp NF2 product page or download the spec sheet.

The idChamp® DX1 is a Durable Low-Frequency Handheld wireless enabled RFID Reader. It is capable of reading animal ear tags and injectable microchip tags at 134.2 kHz. Read/Write – FDX-B/HDX ISO-11784/85, TIRIS, EM4100. The reader is designed for close-proximity work with livestock, domestic animals, pets, or animal samples.  The idChamp® DX1 is ideal for quick verification activities in agricultural or veterinary operations that wish to take their solution mobile on iOS, Android, & Windows 10. Giving the user the ability to read animal tags both in the office and out in the field. The

idChamp® A9-UHF is a fast Android device with three (3) different built-in scanning devices: RFID-UHF reader/writer RFID-NFC reader/writer 2D/1D Barcode reader Read UHF EPC Gen 2 (ISO 18000-6C) tags as far as 5 m (16.5 ft.) and write data up to 1.5 m (4.9 ft.) away. Built-in NFC (Near-Field-Communication) RFID reader reads and writes NFC tags and chips. Built-in 2D barcode scanner with laser aiming performs fast reads of all major symbologies of 2D and 1D barcodes. To learn more, visit the idChamp A9 product page or download the spec sheet.

The IceKey HF is a USB RFID reader manufactured by Tertium Technology. It is designed to perform read/write operations on HF (high frequency) RFID tags. For more information, visit Tertium Technology’s product page for the IceKey HF.  Serialio.com is a certified reseller of Tertium Technology products.

Cloud-In-Hand is Serialio’s scalable mobile solutions framework. To learn more about Cloud-In-Hand, visit https://cloud-in-hand.com. 

BlueSnap dongles are used to Bluetooth enable RS-232 devices. BlueSnap dongles are available in 9-pin male or female connections. These units are also available in battery powered (two AAA batteries – rechargeable or alkaline) or externally powered modules. BlueSnap Standard units are compatible with Serial Port Profile (SPP) or Human Interface Device (HID) configurations and BlueSnap Smart units are compatible with Bluetooth 4.0 (BLE). Please note HID modules are able to send data to iOS devices but can not receive data from the iOS device. The BlueSnap product line includes: