To use the IceKey HF with SerialMagic for keyboard emulation follow the steps below. Download and install SerialMagic Professional from our downloads page. Be sure to select the link for the correct Windows version. 1. Add the IceKey HF Plug your IceKey HF reader into the PC. When you open SerialMagic you will be prompted […]
Using the IceKey HF in Keyboard Mode on Windows Read More »
RS3 Has been discontinued. See the RS3x You can adjust the sleep timer for the idChamp RS3 Reader to allow for a longer timeout period or disable it completely. To do so, you will need a USB-RS232 adapter and a terminal program such as TeraTerm or PuTTY. Follow the steps below to configure this timeout period
Adjust Sleep Timer idChamp RS3 Read More »
Ultra-BB2 Has been discontinued. See the Ultra-RE40e To configure the Scanfob® Ultra-BB2 you will need the following items: Add the Scanfob® Ultra-BB2 Once you have all the necessary components, plug the Scanfob® Ultra-BB2 into your Windows PC using the USB cable then open SerialMagic Professional. If you have never used SerialMagic Professional before, you will be
Setup Scanfob Ultra-BB2 SerialMagic Professional Windows Read More »
This article is only for history purposes. SSP feature of Scanfob is not valid for devices sold since 2018. This article demonstrates how to use yACK FAST for Android to set up the Scanfob (Ultra-RE40e or NFC-BB2e) to connect to Windows 10. Due to how Windows 10 Bluetooth pairing works, you cannot pair with the
Setup Scanfob BB2e to Pair with Windows 10 Read More »
This Product is discontinued. See the RS3x. To prepare your idChamp RS3 for HID (otherwise known as “keyboard mode”), follow the instructions below. Use the DIP switch table at the end of this page for reference. 1. Power off your RS3 and take it out of its enclosure by unscrewing the four screws, then lifting the
How to configure the idChamp RS3 for HID (keyboard) mode Read More »
This post shows how to wirelessly connect the Scanfob Ultra-BB2e or Scanfob NFC-BB2e to connect to Windows 10 & Windows 11. Note for versions of BB2e prior to 2022 — you must first use yACK FAST (for Android or iOS) to enable the bl e e setting for the Scanfob BB2e to work with Windows
Connect BB2e to Windows Wirelessly with SerialMagic Professional Read More »
This page serves as a complete guide on how to use RFIDeas pcProx Configuration Utility for Windows to configure the idChamp RS3 You will need the following for this tutorial: A Windows PC pcProx Configuration Utility for Windows installed [Download Link] idChamp RS3 [Purchase Here] USB to RS-232 adapter cable [Purchase Here] RS-232 to micro
This article demonstrates how to use the idChamp RS4 and iScanBrowser for iOS to write NDEF data to NFC tags. In the first section of this guide, we’ll learn how to write an NDEF record to a tag. In the second section, we’ll test the tag by reading the NDEF data. You will need: Before you
Write NDEF Data idChamp RS4 and iScanBrowser iOS Read More »
This guide demonstrates how to use Android built-in NFC reader and NFC Gears’ Write NDEF message feature (available in version 2.2.24 and later). You will need: NFC Gears (available on the Google Play Store) NFC enabled An NFC tag (with an empty NDEF data store) 1. Launch NFC Gears. 2. Tap on “SETTINGS.” 3. Hold the
How to Use NFC Gears and Android’s Built-in NFC Reader with to Write NDEF Data Read More »
DIP Switches For FAST Battery & Kiosk Modes | NF4x, RS4x, RS3x, DX1 You set the idChamp® NF4x DIP switches for some options. First remove cover on the idChamp® reader models NF4x, RS4x, RS3x, DX1. Second see idChamp® NF4x Wireless RFID-NFC Smart Card Reader/Writer Switches for ‘button power on’ (Battery) mode. Switches are also the same
NF4x DIP Switches | Always-On Option For Battery Unit Read More »