Serialio

FAQ'S

iPhone Post RFID As Keystrokes

Post RFID Reads As Keystrokes With Wireless RFID Reader You have been able to post RFID readings as keystrokes using SerialMagic for years. First you connect a Scanfob or idChamp brand RFID reader using SerialMagic. Next you make SerialMagic Keys the active keyboard, then scan. Finally you would see data ‘typed’ to the cursor location of any application that accepted keyed input. On Android, SerialMagic was the first application you could use support doing the same with the built-in NFC reader on Android. However, HOW can you do this using the

Read More »

BOSCH Laser Measurements iOS

Post laser measurements on iOS using Bosch GLM & Blaze models. Measurements are posted to any iOS app as if data was typed, so use with all iOS apps that take keyed input. Your measurements will be 100% accurate when put into your app since user errors are eliminated. 100% Accurate Measurement Input You no longer need to worry about you, or your personnel typing the wrong information into your app. SerialMagic Keys provides 100% accurate keyed input, the laser measurements on iOS come directly from BOSCH device to iPad or iPhone. Supported

Read More »

Faster NF4x On iOS Mobile Grid

Get faster badge reads on your idChamp® brand NF4x RFID-NFC reader on iOS. You speed up NF4x reads to check-in people faster for class attendance, mustering, or other event needing attendance. This example shows iOS SDM option. NF4x Badge Reader Modes: Smart & Direct Your idChamp® brand NF4x Badge Reader has two basic modes, Smart, and Direct. In Smart Mode the application easily controls what badge types are recognized and decodes the credential information as needed in the app. In Direct Mode the NF4x is loaded with specific firmware that does all badge processing

Read More »

Faster NF4x Reads iOS iScanBrowser

Your idChamp® brand NF4x RFID-NFC reader works great on iOS. Now get faster NF4x reads on iOS to check-in people faster for class attendance, mustering, or other event needing attendance.   NF4x Badge Reader Modes: Smart & Direct Your idChamp® brand NF4x Badge Reader has two basic modes when connected to iOS, Smart, and Direct. In Smart Mode the application easily controls what badge types are recognized and decodes the credential information as needed in the app. In Direct Mode the NF4x is loaded with specific firmware that does all

Read More »

How To Speed Up NF4x Reads

Your idChamp® brand NF4x RFID-NFC reader works great. Now you want to speed up NF4x reads to check-in people faster for class attendance, mustering, or other event needing attendance. This example shows Android SDM option. NF4x Badge Reader Modes: Smart & Direct Your idChamp® brand NF4x Badge Reader has two basic modes, Smart, and Direct. In Smart Mode the application easily controls what badge types are recognized and decodes the credential information as needed in the app. In Direct Mode the NF4x is loaded with specific firmware that does all badge processing in the

Read More »

ID Shown On RFID Badge

How To Post Number Shown (Printed) On RFID Badge What do you do when you want to use an existing RFID-NFC badge for a new solution?This post shows you how the ID shown (printed) on an RFID badge can be posted. Having your idChamp® brand NF4 RFID-NFC reader post the correct value is easy using the Serial Device Manager (SDM). You simply scan the RFID badge, enter the value printed on the badge, and the PAC Wizard does the setup. Apps Using the Serial Device Manager (SDM) Apps SerialMagic Keys,

Read More »

Read Write RI-TRP-DR2B-40 RFID Glass Transponder

Read & write RI-TRP-DR2B-40 RFID transponder. The idChamp® DX1 LF RFID reader/writer provides just the solution you need. The DX1 reads – and writes when supported by the chip – using the HDX & FDX protocols. Read & Write 134.2kHz RFID Chips You can write from iOS devices like iPhone, iPad, iPod Touch. This works for all apps using apps supporting the serialio.com SDM. Alternately, if you prefer Android use your Android tablet or smartphone. Moreover, Contact serialio.com to provide your solution for Windows and MacOS. Your flexibility is unmatched

Read More »

Sending Wireless Bluetooth Data Using 3rd Party Keyboard SerialMagic Keys

How can iOS keyboard be used to send user specified data to a wirelessly connected device?  SerialMagic Keys iOS provides a ‘Command Key’ option to send user defined data to trigger some event on the device connected to BlueSnap M6A DB9 connector serial port e.g. to trigger scale to send weight, RFID reader to read tag, sensor to take measurement, barcode scanner to read barcode, etc.   Open SerialMagic Keys app on iPhone, iPad, iPod Touch, then tap on “Command Key” Choose the wireless device that SerialMagic Keys will send

Read More »

What is SerialMagic?

SerialMagic is a versatile cross-platform program that allows you to use nearly any Bluetooth, USB, or RS-232 device that uses Serial Port Profile (SPP) to send data into virtually any application. Furthermore, SerialMagic allows for various automation techniques, such as string manipulation (include control characters) and device configuration. The SerialMagic product line consists of SerialMagic Professional for desktop operating systems (Mac OS X and Windows), SerialMagic Gears for Android, and SerialMagic Keys for iOS. SerialMagic programs allow data entry from many Bluetooth barcode, RFID, and NFC scanners into applications that

Read More »

How does SerialMagic licensing work?

When you purchase a SerialMagic license key, you will receive a license token. The license token is used with your device’s (iOS/Android/Mac/Windows) hardware ID to generate a license key specific to your device. This license key is valid for one device (computer or mobile device); if you have multiple devices that you want to use with SerialMagic, you must purchase multiple licenses. Many of our genuine Serialio scanners have an embedded license that allows you to use that scanner on any SerialMagic-supported platform without purchasing a license key (or requiring

Read More »