Set Wireless Mode FAST or HID You set idChamp® NF4x, RS4x, RS3x, DX1x RFID-NFC reader/writer wireless modes are set using the yACK FAST app. IMPORTANT – Only set NF4x Direct Mode model reader in HID Keyboard (KB) Mode. When you set the NF4x Smart Mode model to KB mode, it will not work. NF4x
idChamp® NF4x RS3x RS4x Wireless Modes Read More »
Setup the idChamp® NF4x to post correct RFID badge value You use the NF4x SDM PAC Wizard to get the correct RFID badge value to post to your iOS application. You scan a badge, but the RFID-NFC value posted is not the value printed on the card. This post shows you how to get the
idChamp NF4x Post Correct RFID Badge Value Read More »
Use Android NFC to Connect Bluetooth Scanner. How to use Android‘s built-in NFC sensor to pair with a Bluetooth scanner that has an embedded NFC chip with it’s MAC address stored in the NDEF data (such as the Scanfob 2006). Tip — You can enable this feature with any BLE scanner by writing the scanner’s
Android NFC Connect Bluetooth Scanner Read More »
This support article will walk you through the steps to pair your Serialio Scanfob with iOS (iPhone, iPod, iPad) in HID-Keyboard mode. As a general best-practice, make sure your Scanfob is fully charged (indicated by a green LED when plugged in). 1. Put your Scanfob in Bluetooth HID (keyboard) mode by scanning the control code
Pair Scanfob® Brand Barcode Scanner with iOS in Keyboard Mode Read More »
f your barcode or RFID scanner is having problems sending data, connecting or is behaving in an unexpected manner, try resetting it. You will find instructions for performing a “reset” on various scanners sold by Serialio in the table below. If you continue to have issues after resetting your scanner (or if you don’t see
Soft Reset Scanfob® Brand Scanner Read More »
How to pair in wireless SPP vs FAST the differences and similarities between the pairing process for SPP (Serial Port Profile) and FAST. Although these two profiles are commonly used for a variety of applications, the focus of this guide is on the implications related to using Serialio’s scanners in either SPP and FAST modes. The
Connect SPP vs FAST Read More »
This article provides instructions on how to perform a factory reset on a KDC200 barcode scanner. 1. Hold down both the up and down arrows, located on the left side of the device. 2. Once the menu appears, use the same arrow buttons to scroll through the options until you see “System Config” highlighted. 3.
How to factory reset the KDC200 Read More »
The KeyBatch BR2 can be used as a flash drive, allowing you to access your scans by plugging in the scanner to your computer and opening the drive that appears. You can configure the formatting of the scans using the configuration guide (in links below). This includes how time and date formats display, what fields
How to use the KeyBatch BR2 as a flash drive Read More »
This app note walks you through the process of pairing an LLRP based scanner to the Serial Device Manager (SDM) on Android. The SDM is a core component of Serialio’s Android applications, including SerialMagic Gears, iScanBrowser, Cloud-In-Hand Mobile Grid, and Cloud-In-Hand Mobile Attendance. For the purposes of this note, we’ve used Cloud-In-Hand Mobile Grid, but
How to pair with an LLRP scanner via the SDM on Android (Cloud-In-Hand Mobile Grid) Read More »
You can download trial versions of SerialMagic on many of the available platforms. You can download SerialMagic from our downloads page (for Windows Desktop, Windows Mobile, and Mac OS) or from the Google Play Store (for Android). If the software is not licensed you will receive a nag message that reads “Unlicensed SerialMagic” every third
SerialMagic Trial Versions Read More »