Serialio

Support

idChamp® NF4x LED & Button Descriptions

NF4x has one physical button for power on/off and functionality, and one micro-USB connector for power/charging. Battery model: Press the button briefly to power on the unit. Press and hold the button and Connection LED will blink briefly, then stop blinking, when blinking stops, release the button and NF4x will power off. Kiosk model: Plug micro-USB …

idChamp® NF4x LED & Button Descriptions Read More »

How to install SerialMagic Professional for Windows

This support article demonstrates how to install or update SerialMagic Professional for Windows. 1. Download the SerialMagic Professional installer for Windows from Serialio.com/downloads. 2. Double-click the installer to launch it (this initiates the installation). You may be prompted by Windows’ UAC to authenticate the installation. 3. Agree to the terms and conditions to begin the installation. …

How to install SerialMagic Professional for Windows Read More »

How to connect the BlueSnap M6A (BLE) to SerialMagic Professional for Windows

This article demonstrates how to connect the BlueSnap modle M6A smart Bluetooth Low Energy (5.0) to an RS-232 adapter to Windows using SerialMagic Professional. We have broken down this process into three steps: (1) Pair through Windows Bluetooth, (2) Pair through SerialMagic Professional, and (3) Start the connection. This tutorial will only work after yACK BLE …

How to connect the BlueSnap M6A (BLE) to SerialMagic Professional for Windows Read More »

How to setup the Ultra-PD1 with SerialMagic Professional for Windows

This article demonstrates how to set up the Ultra-PD1 with SerialMagic Professional on Windows via a cabled connection. 1. Connect the Ultra-PD1 to your Windows PC via the USB A to USB A cable. 2. Launch SerialMagic Professional And click “Add” to create a new connection. 3. Select “Cabled Connection” and the image of the Ultra-PD1 …

How to setup the Ultra-PD1 with SerialMagic Professional for Windows Read More »

How to activate SerialMagic Professional (Windows)

This article provides instructions on how to find your unique device ID (DID) and activate your installation of SerialMagic Professional for Windows for use with non-genuine scanners (scanners that were not purchased from Serialio). You will need to contact a Serialio representative to complete this process (you cannot activate your software alone). If you haven’t …

How to activate SerialMagic Professional (Windows) Read More »

How to unpair your device from SerialMagic Professional and Windows Bluetooth settings

This support article will walk you through unpairing your device from a Windows computer. The first section (Part A) provides instruction for unpairing with SerialMagic Professional on Windows (applies to all types of connections). The second section (Part B) provides instruction for unpairing from Windows Bluetooth Settings (applies to devices in paired with Bluetooth-HID (keyboard …

How to unpair your device from SerialMagic Professional and Windows Bluetooth settings Read More »

How to pair with SerialMagic Professional for Windows via Bluetooth SPP

This support article will walk you through how to pair your Scanfob with SerialMagic Professional on Windows 10. For the purposes of this tutorial, we used a Scanfob 2006 Bluetooth Barcode Scanner in SPP mode. The process for pairing any barcode/RFID scanner with SerialMagic Professional for Windows in SPP mode is nearly identical. Pair with …

How to pair with SerialMagic Professional for Windows via Bluetooth SPP Read More »

How to submit a log for SerialMagic Professional for Windows

This support article will walk you through how to submit a log from SerialMagic Professional for Windows. For the purposes of this tutorial, we used SerialMagic Professional version 6.4.0.9 on a Windows 10 computer. If you are having problems with SerialMagic Professional for Windows, please contact the Serialio support team. Include the following information: SerialMagic …

How to submit a log for SerialMagic Professional for Windows Read More »

Bluetooth SPP Setup for OS X

Configure a Bluetooth scanner on OS X for use with SerialMagic. This document is relevant for using a LaserChamp or Flic barcode scanner on OS X with SerialMagic LC, or using SerialMagic Pro with a 3rd party Bluetooth barcode scanner on OS X such as the HHP IT5260. Note: SerialMagic Pro for OS X provides Bluetooth device setup …

Bluetooth SPP Setup for OS X Read More »

How to submit a log for SerialMagic Professional for Mac OS X

If you are having problems with SerialMagic Professional for Mac, please contact the Serialio support team. Include the following information: SerialMagic Professional version number (e.g. “6.4.0.9”) OS X version (e.g. “OS X 10.11”) Order number Device/scanner model (e.g. “Scanfob 2006”) Your use case-scenario (e.g. “data is sent into a spreadsheet”) Configure SerialMagic to Log to …

How to submit a log for SerialMagic Professional for Mac OS X Read More »