WiSnap

To configure the WiSnap adapter for software access point mode follow the below steps: 1. Connect the WiSnap adapter to your PC using a USB-RS232 cable. 2. Configure your terminal application (PuTTY, TeraTerm, etc.) with the settings: 9600 baud 8 data bits 1 stop bit no parity no flow control 3. Start the terminal application. […]

This app note demonstrates how to connect the WiSnap RS-232 dongle via Wi-Fi to an Android AP (access point) that is connected to the internet via a 3G/4G cellular network. To clarify, we are going to set up the Android device (with access to a cellular network) as a Wi-Fi access point, then configure the

Select A Terminal Application Before we begin, it’s important that you make sure that you have a compatible terminal emulator installed on your computer. Here, at Serialio, we often use our product, JavaTerm. There are also a myriad of different terminal emulators (for Mac and Windows) that will do just fine. If you don’t know