Bluetooth SPP and Bluetooth Low Energy Comparison

Bluetooth SPP and Bluetooth Low Energy Comparison

This support article will demonstrate the differences and similarities between Bluetooth SPP (Serial Port Profile) and Bluetooth Low Energy (BLE). Although these two Bluetooth profiles are commonly used for a variety of applications, the focus of this guide is on the implications related to using Serialio's Bluetooth scanners in either SPP or BLE mode.

 

 

  1.  

Pairing in BLE Mode vs Pairing in SPP Mode

The most important difference when switching between BLE and SPP is that you CANNOT pair through your device's Bluetooth Settings while using BLE mode. Below are basic instructions on how to pair your Bluetooth scanner is each mode.

  1.  
  2.  

Pairing in SPP Mode

1. Take the appropriate actions to put your device in Bluetooth SPP mode.

For example, scan the "Bluetooth-SPP" control code or adjust the DIP switches to support SPP mode.

2. Make your device discoverable and connectable.

For example, scan the "Make Discoverable & Connectable" control code or hold down the small function button (available on most Scanfob-brand scanners)

3. Navigate to your host device's Bluetooth settings

Host device:  the device you are pairing your scanner to. Example host devices include; an Android tablet, an iPhone and a Windows PC.

4. Tap on your scanner's Bluetooth name to pair with it.

5. After pairing through your host device's Bluetooth settings, launch (or open) the application you wish to use with your scanner.

Example Bluetooth-SPP supporting applications: SerialMagic Gears for Android, SerialMagic Professional for Windows.

6. Navigate to the application's settings/connection manager.

For example, with SerialMagic Gears you would tap on the Options button, then "Device Manager."

7. Pair your scanner to the Bluetooth-SPP-supporting application.
  1.  
  2.  

Pairing in BLE Mode

1. Take the appropriate actions to put your device in Bluetooth Low Energy (BLE) mode.

For many devices, BLE is the only Bluetooth mode available (e.g. Scanfob NFC-BB2-LE, Scanfob Ultra-BB2e). Devices that are only capable of BLE mode will often be named with the suffix "E" or "LE."

For these devices, you do not have to configure the Bluetooth mode.

2. Make your device discoverable.

Some devices, such as the idChamp RS3, are made discoverable automatically ince they are powered on.

3. Launch the BLE-enabled application you wish to connect to.

Examples of BLE-supporting applications: SerialMagic Gears for Android, the RS3-NFC Setup app for iOS/Android and Cloud-In-Hand Mobile Grid for iOS/Android.

4. Navigate to the connection/device manager for the BLE-enabled application.
5. Pair your scanner directly to the application (bypassing the host device's Bluetooth settings)