SerialMagic Support - Configure BlueSnap RS-232 Hardware(Using SerialMagic Pro - WindowsMobile Smartphone)
More ways to use SerialMagic.
Setup BlueSnap configuration wirelessly using SerialMagic Pro - Windows Mobile (Smartphone edition, non-touch screen)
With SerialMagic Professional for Windows Mobile Smartphone, it is easy to configure BlueSnap Hardware, wirelessly!
Just download and install SerialMagic Professional on your Smartphone, and then launch the SerialMagic Professional software.
Select Menu > Tools > Setup Remote BlueSnap (Note: older versions of SerialMagic will show "Configure" in place of "Setup"), and ensure the BlueSnap is powered up.
SerialMagic will begin to search for Bluetooth devices. Select the BlueSnap device you wish to configure, in this case "BlueSnap-31F3."
Next, cycle the power on the BlueSnap device. If there is no power switch on the device, unplug the power adapter or battery, then click OK.
After SerialMagic prompts you to Power ON the module, turn the power back on.
Shortly after, SerialMagic will begin to read the current configuration settings, you will notice the LED light on the unit flashing rapidly.
Next, a list of configurable settings will appear, scroll to view the entire list.
Select the desired settings for the BlueSnap to work with your serial device.
Settings that have been modified will be displayed in red. Click OK when finished.
The selected settings will be saved. Using SerialMagic Pro, it's that easy!
Refer to the Advanced Command Interface guide for more details on configuring BlueSnap hardware.
(This document applies to the BlueSnapXP, BlueSnap Standard Male & Female, and BlueSnap 9V devices)
*To configure the BlueSnap USB module, use a Windows Terminal program or Serialio's USB-RN-X application.*
Download SerialMagic Professional