SerialMagic Support - Configure BlueSnap RS-232 Hardware (Using SerialMagic Pro - Windows Mobile Pocket-PC)
More ways to use SerialMagic.
Setup BlueSnap configuration wirelessly using SerialMagic Pro - Windows Mobile Touch-screen devices (aka Pocket-PC)
With SerialMagic Professional for Windows Mobile, it is easy to modify BlueSnap settings, wirelessly!
Just download and install SerialMagic Professional on your Windows Mobile Professional or Standard (aka Pocket-PC) device, and then launch the software.
Select Menu > Setup Remote BlueSnap (Note: older versions of SerialMagic will show "Configure" in place of "Setup"), ensure the BlueSnap is powered up.
SerialMagic will begin to search for Bluetooth devices. Select the BlueSnap device you wish to configure, in this case "BlueSnapXP-C745."
Next, cycle the power on the BlueSnap device. If there is no power switch on the device, unplug the power adapter or battery, then click OK.
After SerialMagic prompts you to Power ON the module, turn the power back on.
Shortly after, SerialMagic will begin to read the current configuration settings, you will notice the LED light on the unit flashing rapidly.
Next, a list of configurable settings will appear. Select the desired settings for the BlueSnap device to work with your serial device.
Settings that have been modified will be displayed in red. Scroll down and select "Save..." to configure the BlueSnap with these settings.
The selected settings will be saved. Using SerialMagic Pro, it's that easy!
Refer to the Advanced Command Interface guide for more details on configuring BlueSnap hardware.
(This document applies to the BlueSnapXP, BlueSnap AAA, BlueSnap Standard Male & Female, and BlueSnap 9V devices)
*To configure the BlueSnap USB module, use a Windows Terminal program or Serialio's USB-RN-X application.*
Download SerialMagic Professional