Palm Universal Connector Serial RS-232 Cable
...I just got my Palm RS-232 serial cable today and it clips solidly onto my new Tungsten T3.
This cable above (model U1) has a positive locking mechanism, the cable below (model U2) has a snug fit mechanism. Both cables will work with Palm Universal Connector devices. One caveat to the positive locking cable, some Tungsten T3 and Zire 71 devices have poor manufacturing tolerances, for these units the snut fit cable is recommended.
Serialio.com Palm cables are guaranteed for proper operation with SerialMagic software on the Palm*.
See the cable in action with the LaserChamp.
These cables also work with virtually all applications that require an RS-232 serial cable. The cable has a DB-9 Male connector on one end, and a universal Palm connector on the other.
The cable works with Palms that have the Universal Connector - Tungsten C/W/T/T2/T3, Zire 71, m500, m505, m515, m125, m130, i705 (see different palm faces)
*Note: Some RS-232 serial cables have been found to not work properly with SerialMagic software. This is because the cables themselves are not manufactured according to Palm specifications. The typical problems with Palm RS-232 serial cables that don't work properly are twofold. First, they will prevent keystrokes in the Application Launcher, and they also fail to function for the first couple of minutes after connected to the Palm, after they are removed from the cradle.
Looking for a Palm Multi-Connector cable? Please look here.
Note: Adaptor may not be exactly as pictured above.
Palm Tungsten C serial cable, Palm tungsten T2 serial cable, Palm tungsten T3 serial cable, Palm tungsten W serial cable, Palm tungsten RS-232 serial cable, Palm Zire 71 RS232 serial cable, Palm RS-232 serial cable Tungsten T3, Tungsten T2 serial cable, Tungsten T3 serial cable, Zire 71 serial cable, Tungsten W serial cable