This outlines the installation of a program that will perform a fix to allow the Zaurus to function properly when run in INIT 3 mode. Without this fix the time cannot be set on the Zaurus when run in INIT 3 mode, and the Zaurus will completely lockup when an alarm is added to the calendar.
1) Start Add/Remove Software
2a) Tap Install packages via networks.
2b) If you don't have access to the net from your Zaurus, download the IPK file here, put the IPK on a CF or SD card, or in the /home/root/Documents folder, then tap Install packages, and skip to step 5.
3) Tap the switch  icon in the lower right portion of the screen
4) Tap New, then in the Name: field enter serialio.com (or some other name) and in the URL: field enter http://www.serialio.com/zpkgs, then tap OK or push the OK button on the Zaurus. Depending on the speed of your network connection, the Package Manager screen may take several seconds to update.
5) Double-tap the serialio-fixatd packge
5) Tap Install and the icon will indicate the package is selected for install.
6) Push the OK button or tap OK
7) Push the OK button or tap OK
8) Tap the X in the upper right of the screen or push the Cancel button and the package install will complete.
9) Go to the Settings panel and tap the fixatd program.
10) Once the fix is complete the program can be removed.
|
